IP67 cases offer solid waterproof protection for most beach and water activities, but they are not designed for continuous submersion or high-pressure water exposure. The IP67 rating means a case can survive being submerged in up to one meter of fresh water for 30 minutes. For splashes, rain, and brief dips, that is usually enough. For diving, surf, or extended water contact, you need to understand the limits before trusting your gear to it.
What does IP67 actually protect against?
IP67 is an international standard that defines two levels of protection: complete dustproofing (the “6”) and submersion resistance up to one meter of fresh water for up to 30 minutes (the “7”). A case with an IP67 rating will block all dust ingress and survive a brief, shallow submersion without letting water in. It does not mean the case is rated for deeper water, continuous immersion, or high-pressure jets.
The “IP” stands for Ingress Protection, and the two digits each measure something different. The first digit runs from 0 to 6 and rates solid particle protection. A rating of 6 means no dust can enter under any conditions. The second digit runs from 0 to 9 and rates liquid ingress. A rating of 7 covers temporary submersion at shallow depth.
In practical terms, IP67 cases handle the following without issue:
- Heavy rain and standing water
- Splashes from any direction
- Brief drops into shallow water
- Dusty, sandy, or muddy environments
- Humid storage conditions
What the rating does not cover is sustained pressure at depth, repeated submersion cycles over time without seal inspection, or water forced in at high velocity. The seal integrity of any case also depends on the condition of the gasket, so regular inspection matters.
Is IP67 waterproof enough for beach use?
For most beach use, IP67 cases are more than adequate. Splashing waves, sea spray, sandy conditions, and the occasional drop in shallow water all fall well within what IP67 protection handles. If you are keeping your case on the shore, in a boat, or near the water without submerging it, IP67 gives you reliable protection.
The main risk at the beach is not the water depth. It is the combination of saltwater, sand, and repeated exposure over time. Saltwater is more corrosive than fresh water and can degrade seals faster if the case is not rinsed and maintained. Sand particles, even fine ones, can work into gaskets if the case is opened and closed repeatedly in sandy conditions.
For a day at the beach where you are protecting a camera, drone, or audio equipment, a well-maintained IP67 case gives you the protection you need. The key is keeping the seal clean and not relying on the rating as a reason to skip basic care.
What’s the difference between IP67 and IP68?
The core difference between IP67 and IP68 is the depth and duration of submersion they are rated for. IP67 covers submersion up to one meter for 30 minutes. IP68 is rated for deeper submersion, with the exact depth and duration defined by the manufacturer, typically beyond one meter and for longer periods. Both ratings provide complete dustproofing.
In real-world terms, IP68 is the better choice if your equipment will be used in or around water regularly, at greater depths, or for longer periods than a brief accidental drop. For most field professionals and outdoor users who are not diving or working underwater, the practical difference is small.
It is also worth noting that IP68 devices are not automatically better in every way. The rating only addresses water and dust ingress. Impact resistance, seal longevity, and build quality are separate factors that determine how well a case actually performs in demanding conditions.
Does IP67 protect against saltwater and sand?
IP67 cases protect against saltwater and sand ingress during the rated conditions, but saltwater and sand create additional long-term risks that the IP rating does not address. The rating confirms that water and particles cannot enter the case during a standard test. It does not account for the corrosive effect of salt on seals and hardware over repeated exposure.
Sand is one of the most common causes of seal degradation in field cases. Fine particles can lodge in the gasket groove when the case is opened, and over time this compromises the seal. Saltwater accelerates corrosion on metal components like hinges, clasps, and pressure valves if they are not rinsed after exposure.
To maintain IP67 performance in beach and marine environments, follow these steps:
- Rinse the case with fresh water after saltwater exposure
- Inspect the gasket for sand or debris before closing
- Dry the case before storing it closed for extended periods
- Check the seal condition periodically, especially after heavy use
With proper maintenance, an IP67 case holds up well in coastal and outdoor environments. Without it, the rating degrades faster than the case itself.
When should you use a hard case instead of relying on IP67?
You should use a hard case whenever your equipment is valuable, fragile, or difficult to replace, and when the environment involves more than just moisture. IP67 protection on a device or soft bag addresses water and dust, but it does nothing for impact, compression, or rough handling. A hard case adds a layer of physical protection that no IP rating alone provides.
Hard cases are the right choice in these situations:
- Transporting gear on boats, ATVs, or in cargo holds where impacts are likely
- Checking equipment as luggage or shipping it
- Working in environments where the case may be dropped, stacked, or thrown
- Protecting multiple items together with a custom foam interior
- Storing equipment long-term in humid or dusty conditions
An IP67 rating on a hard case means you get both impact resistance and environmental sealing in one solution. The shell absorbs shocks and distributes force away from the contents, while the IP67 seal keeps water and dust out. For professionals who work in the field, on location, or in unpredictable conditions, that combination is what makes a hard case worth carrying.
Relying on a device’s built-in IP rating without a protective case is a risk calculation. Most consumer electronics with IP ratings are tested under controlled conditions. Real-world use involves drops onto hard surfaces, pressure from stacking, and repeated exposure that accelerates wear on built-in seals.
How HUSK Cases help with IP67 protection in the field
HUSK Cases builds hard cases with IP67-certified waterproof and dustproof construction, designed for professionals and serious users who need reliable gear protection without paying a premium for it. Every case uses an NK-7 high-impact polypropylene shell combined with a pressure equalization valve and a tight-fitting gasket seal to maintain IP67 performance in real-world conditions.
Here is what you get with a HUSK hard case:
- IP67-certified protection against water submersion up to one meter and complete dust ingress prevention
- NK-7 impact-resistant shell that absorbs shocks and protects contents from drops and rough handling
- Pressure equalization valve that prevents seal stress from temperature and altitude changes
- Temperature range of -40°C to +80°C for use in extreme environments
- Modular interior options including custom foam layouts tailored to your specific gear
- 40+ case sizes to match different equipment types and configurations
- 5-year warranty backed by a dealer network across Europe
Whether you are protecting a camera kit at the coast, a drone during travel, or sensitive field electronics on a job site, HUSK Cases gives you the protection you actually need at a price that makes sense. Browse the full range at huskcases.com and find the right case for your equipment.